ESP32 Forum

Dear members,

I had problem about using esp32 driver for mbedtls on STM32 Nucleo
Source code is below,
https://os.mbed.com/teams/Renesas/code/ ... mple-wifi/

I migrated to STM32 board and seems to be good to communicate with esp32

however, the error occurred at reset(),

Could you let me know if you have any information ?

the message is:

++ MbedOS Fault Handler ++

FaultType: HardFault

Context:
R0 : FFFFFFFF
R1 : 00000000
R2 : 20001E8C
......
..
..
++ MbedOS Error Info ++
Error Status: 0x80FF013D Code: 317 Module: 255
Error Message: Fault exception
Location: 0x80144E1
Error Value: 0x8019292
Current Thread: Id: 0x20002270 Entry: 0x8014E11 StackSize: 0x200 StackMem: 0x200022F8 SP: 0x20017EB0
For more info, visit: https://armmbed.github.io/mbedos-error/ ... 0x80FF013D
-- MbedOS Error Info --
Regards,

As all this is on the STM32 side, I'm afraid there's not much we can say about this... you may be better off asking the mbedos people.