Problem to upload code in ESP32 R1 D32 kit
Posted: Sun Jul 05, 2020 6:48 am
I'm facing a problem on upload code to ESP32 D1 R32 kit.
it gives error as below
Error 1:
Serial port COM3
Connecting........_____....._____....._____....._____....._____....._____.....____An error occurred while uploading the sketch
_
A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
Error 2:
Serial port COM3
Connecting........_____....._____....._____....._____....._____.....__
Chip is ESP32D0WDQ6 (revision 1)
A fatal error occurred: Invalid head of packet (0x65)
A fatal error occurred: Invalid head of packet (0x65)
My settings:
Arduino: 1.8.12 (Windows 10), Board: "ESP32 Dev Module, Enabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 115200, None"
(i already updated driver for CH340 ,and my cable is working with other kit)
it gives error as below
Error 1:
Serial port COM3
Connecting........_____....._____....._____....._____....._____....._____.....____An error occurred while uploading the sketch
_
A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
Error 2:
Serial port COM3
Connecting........_____....._____....._____....._____....._____.....__
Chip is ESP32D0WDQ6 (revision 1)
A fatal error occurred: Invalid head of packet (0x65)
A fatal error occurred: Invalid head of packet (0x65)
My settings:
Arduino: 1.8.12 (Windows 10), Board: "ESP32 Dev Module, Enabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 115200, None"
(i already updated driver for CH340 ,and my cable is working with other kit)