Wifi Issue
Posted: Mon Feb 06, 2017 11:28 pm
I am able to connect to a router with SSID "Test-Net" and passcode "passpass" with the Arduino code below.
I am unable to connect to the same router using the following c code.
I get the following output...
I can connect to a different network with the above c code, but I need to connect to Test-Net. I have tried make erase_flash, but it yielded the same results after I reflashed it.
Code: Select all
/*
* This sketch sends data via HTTP GET requests to data.sparkfun.com service.
*
* You need to get streamId and privateKey at data.sparkfun.com and paste them
* below. Or just customize this script to talk to other HTTP servers.
*
*/
#include <WiFi.h>
const char* ssid = "Test-Net";
const char* password = "passpass";
const char* host = "data.sparkfun.com";
const char* streamId = "....................";
const char* privateKey = "....................";
void setup()
{
Serial.begin(115200);
delay(10);
// We start by connecting to a WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
int value = 0;
void loop()
{
delay(5000);
++value;
Serial.print("connecting to ");
Serial.println(host);
// Use WiFiClient class to create TCP connections
WiFiClient client;
const int httpPort = 80;
if (!client.connect(host, httpPort)) {
Serial.println("connection failed");
return;
}
// We now create a URI for the request
String url = "/input/";
url += streamId;
url += "?private_key=";
url += privateKey;
url += "&value=";
url += value;
Serial.print("Requesting URL: ");
Serial.println(url);
// This will send the request to the server
client.print(String("GET ") + url + " HTTP/1.1\r\n" +
"Host: " + host + "\r\n" +
"Connection: close\r\n\r\n");
unsigned long timeout = millis();
while (client.available() == 0) {
if (millis() - timeout > 5000) {
Serial.println(">>> Client Timeout !");
client.stop();
return;
}
}
// Read all the lines of the reply from server and print them to Serial
while(client.available()) {
String line = client.readStringUntil('\r');
Serial.print(line);
}
Serial.println();
Serial.println("closing connection");
}
Code: Select all
#include "freertos/FreeRTOS.h"
#include "esp_wifi.h"
#include "esp_system.h"
#include "esp_event.h"
#include "esp_event_loop.h"
#include "nvs_flash.h"
#include "driver/gpio.h"
esp_err_t event_handler(void *ctx, system_event_t *event)
{
return ESP_OK;
}
void app_main(void)
{
nvs_flash_init();
tcpip_adapter_init();
printf("hello world!!!");
ESP_ERROR_CHECK( esp_event_loop_init(event_handler, NULL) );
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
wifi_config_t sta_config = {
.sta = {
.ssid = "Test-Net",
.password = "passpass",
.bssid_set = 0
}
};
ESP_ERROR_CHECK( esp_wifi_set_config(WIFI_IF_STA, &sta_config) );
ESP_ERROR_CHECK( esp_wifi_start() );
ESP_ERROR_CHECK( esp_wifi_connect() );
gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT);
int level = 0;
while (1) {
gpio_set_level(GPIO_NUM_4, level);
level = !level;
vTaskDelay(300 / portTICK_PERIOD_MS);
}
}
Code: Select all
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0008,len:8
load:0x3fff0010,len:2388
load:0x40078000,len:6788
load:0x40080000,len:252
entry 0x40080034
[0;32mI (822) heap_alloc_caps: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (822) heap_alloc_caps: At 3FFB6C40 len 000293C0 (164 KiB): DRAM[0m
[0;32mI (832) heap_alloc_caps: At 3FFE8000 len 00018000 (96 KiB): D/IRAM[0m
[0;32mI (853) heap_alloc_caps: At 4009C0DC len 00003F24 (15 KiB): IRAM[0m
[0;32mI (873) cpu_start: Pro cpu up.[0m
[0;32mI (885) cpu_start: Single core mode[0m
[0;32mI (898) cpu_start: Pro cpu start user code[0m
[0;32mI (1157) phy: phy_version: 258, Nov 29 2016, 15:51:07, 0, 0[0m
[0;32mI (2229) cpu_start: Starting scheduler on PRO CPU.[0m
tcpip_task_hdlxxx : 3ffba704, prio:18,stack:2048
hello world!!!I (2242) wifi: frc2_timer_task_hdl:3ffbc634, prio:22, stack:2048
I (2251) wifi: Init lldesc rx mblock:25
I (2251) wifi: Init lldesc rx ampdu len mblock:7
I (2255) wifi: Init lldesc rx ampdu entry mblock:4
I (2260) wifi: pp_task_hdl : 3ffc943c, prio:23, stack:8192
I (2265) wifi: rx_ba=1 tx_ba=1
I (2268) wifi: mode : sta (24:0a:c4:04:07:78)