I use uart events in one of my projects and was able to build it using c, but it fails when using cpp. I tried the same with the official example found here
https://github.com/espressif/esp-idf/tr ... art_events
It compiles well if using it as is. But as soon as I change file extension to cpp, build fails with these errors:
Code: Select all
_main.dir/uart_events_example_main.cpp.obj -c ../main/uart_events_example_main.cpp
../main/uart_events_example_main.cpp: In function 'void uart_event_task(void*)':
../main/uart_events_example_main.cpp:109:17: error: jump to case label [-fpermissive]
default:
^~~~~~~
../main/uart_events_example_main.cpp:92:25: note: crosses initialization of 'int pos'
int pos = uart_pattern_pop_pos(EX_UART_NUM);
^~~
../main/uart_events_example_main.cpp:49:19: error: enumeration value 'UART_DATA_BREAK' not handled in switch [-Werror=switch]
switch(event.type) {
^
../main/uart_events_example_main.cpp:49:19: error: enumeration value 'UART_EVENT_MAX' not handled in switch [-Werror=switch]
../main/uart_events_example_main.cpp: In function 'void app_main()':
../main/uart_events_example_main.cpp:133:5: warning: missing initializer for member 'uart_config_t::rx_flow_ctrl_thresh' [-Wmissing-field-initializers]
};
^
cc1plus: some warnings being treated as errors
ninja: build stopped: subcommand failed.
ninja failed with exit code 1
Code: Select all
/* UART Events Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "driver/uart.h"
#include "esp_log.h"
static const char *TAG = "uart_events";
/**
* This example shows how to use the UART driver to handle special UART events.
*
* It also reads data from UART0 directly, and echoes it to console.
*
* - Port: UART0
* - Receive (Rx) buffer: on
* - Transmit (Tx) buffer: off
* - Flow control: off
* - Event queue: on
* - Pin assignment: TxD (default), RxD (default)
*/
#define EX_UART_NUM UART_NUM_0
#define PATTERN_CHR_NUM (3) /*!< Set the number of consecutive and identical characters received by receiver which defines a UART pattern*/
#define BUF_SIZE (1024)
#define RD_BUF_SIZE (BUF_SIZE)
static QueueHandle_t uart0_queue;
static void uart_event_task(void *pvParameters)
{
uart_event_t event;
size_t buffered_size;
uint8_t* dtmp = (uint8_t*) malloc(RD_BUF_SIZE);
for(;;) {
//Waiting for UART event.
if(xQueueReceive(uart0_queue, (void * )&event, (portTickType)portMAX_DELAY)) {
bzero(dtmp, RD_BUF_SIZE);
ESP_LOGI(TAG, "uart[%d] event:", EX_UART_NUM);
switch(event.type) {
//Event of UART receving data
/*We'd better handler data event fast, there would be much more data events than
other types of events. If we take too much time on data event, the queue might
be full.*/
case UART_DATA:
ESP_LOGI(TAG, "[UART DATA]: %d", event.size);
uart_read_bytes(EX_UART_NUM, dtmp, event.size, portMAX_DELAY);
ESP_LOGI(TAG, "[DATA EVT]:");
uart_write_bytes(EX_UART_NUM, (const char*) dtmp, event.size);
break;
//Event of HW FIFO overflow detected
case UART_FIFO_OVF:
ESP_LOGI(TAG, "hw fifo overflow");
// If fifo overflow happened, you should consider adding flow control for your application.
// The ISR has already reset the rx FIFO,
// As an example, we directly flush the rx buffer here in order to read more data.
uart_flush_input(EX_UART_NUM);
xQueueReset(uart0_queue);
break;
//Event of UART ring buffer full
case UART_BUFFER_FULL:
ESP_LOGI(TAG, "ring buffer full");
// If buffer full happened, you should consider encreasing your buffer size
// As an example, we directly flush the rx buffer here in order to read more data.
uart_flush_input(EX_UART_NUM);
xQueueReset(uart0_queue);
break;
//Event of UART RX break detected
case UART_BREAK:
ESP_LOGI(TAG, "uart rx break");
break;
//Event of UART parity check error
case UART_PARITY_ERR:
ESP_LOGI(TAG, "uart parity error");
break;
//Event of UART frame error
case UART_FRAME_ERR:
ESP_LOGI(TAG, "uart frame error");
break;
//UART_PATTERN_DET
case UART_PATTERN_DET:
uart_get_buffered_data_len(EX_UART_NUM, &buffered_size);
int pos = uart_pattern_pop_pos(EX_UART_NUM);
ESP_LOGI(TAG, "[UART PATTERN DETECTED] pos: %d, buffered size: %d", pos, buffered_size);
if (pos == -1) {
// There used to be a UART_PATTERN_DET event, but the pattern position queue is full so that it can not
// record the position. We should set a larger queue size.
// As an example, we directly flush the rx buffer here.
uart_flush_input(EX_UART_NUM);
} else {
uart_read_bytes(EX_UART_NUM, dtmp, pos, 100 / portTICK_PERIOD_MS);
uint8_t pat[PATTERN_CHR_NUM + 1];
memset(pat, 0, sizeof(pat));
uart_read_bytes(EX_UART_NUM, pat, PATTERN_CHR_NUM, 100 / portTICK_PERIOD_MS);
ESP_LOGI(TAG, "read data: %s", dtmp);
ESP_LOGI(TAG, "read pat : %s", pat);
}
break;
//Others
default:
ESP_LOGI(TAG, "uart event type: %d", event.type);
break;
}
}
}
free(dtmp);
dtmp = NULL;
vTaskDelete(NULL);
}
void app_main(void)
{
esp_log_level_set(TAG, ESP_LOG_INFO);
/* Configure parameters of an UART driver,
* communication pins and install the driver */
uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.source_clk = UART_SCLK_APB,
};
//Install UART driver, and get the queue.
uart_driver_install(EX_UART_NUM, BUF_SIZE * 2, BUF_SIZE * 2, 20, &uart0_queue, 0);
uart_param_config(EX_UART_NUM, &uart_config);
//Set UART log level
esp_log_level_set(TAG, ESP_LOG_INFO);
//Set UART pins (using UART0 default pins ie no changes.)
uart_set_pin(EX_UART_NUM, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
//Set uart pattern detect function.
uart_enable_pattern_det_baud_intr(EX_UART_NUM, '+', PATTERN_CHR_NUM, 9, 0, 0);
//Reset the pattern queue length to record at most 20 pattern positions.
uart_pattern_queue_reset(EX_UART_NUM, 20);
//Create a task to handler UART event from ISR
xTaskCreate(uart_event_task, "uart_event_task", 2048, NULL, 12, NULL);
}
Code: Select all
idf.py buildESP-IDF v4.3-dev-2586-g526f68239