espflash - No target specified in cargo configuration - how to fix it ?

[35p32fan]

Hi,
using Debian 12 (x86_64)

Device: ESP32-2432S028R

but did not get it work.... what did I wrong ?

Code: [Select all] [Expand/Collapse]

1. cargo install espup
2. git clone https://github.com/esp-rs/esp-idf-hal
3. cd esp-idf-hal

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. $ cargo espflash board-info
2. [2023-10-12T12:56:16Z INFO ] Serial port: '/dev/ttyUSB0'
3. [2023-10-12T12:56:16Z INFO ] Connecting...
4. [2023-10-12T12:56:16Z INFO ] Using flash stub
5. Chip type:         esp32 (revision v3.1)
6. Crystal frequency: 40MHz
7. Flash size:        4MB
8. Features:          WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
9. MAC address:       08:d1:f9:xx:xx:xx

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. $ cargo espflash flash --example=blinky --monitor
2. [2023-10-12T12:59:54Z INFO ] Serial port: '/dev/ttyUSB0'
3. [2023-10-12T12:59:54Z INFO ] Connecting...
4. [2023-10-12T12:59:54Z INFO ] Using flash stub
5. Error: cargo_espflash::no_target
6.  
7.   × Failed to build project
8.   ╰─▶ No target specified in cargo configuration
9.   help: Specify the target in `.cargo/config.toml`, the esp32 support the following targets: xtensa-esp32-none-elf, xtensa-esp32-espidf
10.  

GeSHi © Codebox Plus Extension

Code: [Select all] [Expand/Collapse]

1. $ cat .cargo/config.toml
2. [target.'cfg(any(target_arch = "riscv32", target_arch = "xtensa"))']
3. runner = "espflash flash --monitor"
4.  
5. [target.xtensa-esp32-none-elf]
6. linker = "ldproxy"
7.  
8. [target.xtensa-esp32-espidf]
9. linker = "ldproxy"
10.  
11. [target.xtensa-esp32s2-espidf]
12. linker = "ldproxy"
13.  
14. [target.xtensa-esp32s3-espidf]
15. linker = "ldproxy"
16.  
17. [target.riscv32imc-esp-espidf]
18. linker = "ldproxy"
19.  
20. [target.riscv32imac-esp-espidf]
21. linker = "ldproxy"
22.  
23. [env]
24. ESP_IDF_SDKCONFIG_DEFAULTS = ".github/configs/sdkconfig.defaults"
25.  
26. [unstable]
27. build-std = ["std", "panic_abort"]
28. build-std-features = ["panic_immediate_abort"]
29.  

GeSHi © Codebox Plus Extension