No HTTP response

[Tipman]

I have error code -5 when I run the above code. Homepage can be seen from the code.
Is something wrong with code? Can't find the fault. Or anything wrong with the server?

Code:
#include <WiFi.h> // Replace with WiFi.h for ESP32
#include <WebServer.h> // Replace with WebServer.h for ESP32
#include <AutoConnect.h> // For AutoConnect Wifi
#include <time.h> // For NTP time

//for display
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

//DISPLAY
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels
// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
// The pins for I2C are defined by the Wire-library.
// On an arduino UNO: A4(SDA), A5(SCL)
// On an arduino MEGA 2560: 20(SDA), 21(SCL)
// On an arduino LEONARDO: 2(SDA), 3(SCL), ...
#define OLED_RESET 4 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

int x,minX;
IPAddress ip;

//AUTOCONNECT
WebServer Server; // Replace with WebServer for ESP32
AutoConnect Portal(Server);
AutoConnectConfig Config;

//Webside fra ESP
void rootPage() {
char content[] = "Kapsejlads.nu - HORN";
Server.send(200, "text/plain", content);
}

//SKRIV NTP TID
void printLocalTime(){
struct tm timeinfo; //skriv tiden til timeinfo som tidskode
if(!getLocalTime(&timeinfo)){ //kontroller om tid er modtaget
Serial.println("Failed to obtain time");
return;
}
Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S"); //skriv tid til monitor
}

//SÆT TIDSZONE
void setTimezone(String timezone){
Serial.printf(" Setting Timezone to %s\n",timezone.c_str()); //skriv til monitor
setenv("TZ",timezone.c_str(),1); // Now adjust the TZ. Clock settings are adjusted to show the new local time. Indstil til CPH
tzset(); //indstil tidszonen
}

//HENT NTP TID
void initTime(String timezone){
struct tm timeinfo; //skriv tiden til timeinfo

Serial.println("Setting up time");
configTime(0, 0, "europe.pool.ntp.org"); // First connect to NTP server, with 0 TZ offset. Ingen tidszone eller sommertidskorrektion
if(!getLocalTime(&timeinfo)){ //hvis NTP ikke kan hentes
Serial.println(" Failed to obtain time");
return;
}
Serial.println(" Got the time from NTP"); //NTP tid er hentet
// Now we can set the real timezone
setTimezone(timezone); //sæt tidszonen og dermed evt. sommertid
}


void setup() {
//DISPLAY
// SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS);
//delay(2000); // Pause for 2 seconds
display.setTextSize(1); //font størrelse
display.setTextColor(WHITE); //skrift farve
display.setTextWrap(false); //skift ikke linje
display.clearDisplay(); //ryd display
display.setCursor(0, 10); //start position
display.print("Kapsejlads.nu"); //sæt tekst
display.setCursor(0, 20); //ny position
display.print("by Frank Larsen"); //sæt tekst
display.display(); //skriv til display
x=display.width(); //sæt x = display bredde.

//AUTOCONNECT
Serial.begin(115200);
Serial.println();
Config.apid = "Kapsejlads-horn";
Config.psk = "Kapsejlads.nu";
Portal.config(Config);

//FORBIND WIFI
Server.on("/", rootPage);
if (Portal.begin()) {
Serial.println("WiFi connected: " + WiFi.localIP().toString());
}

//hent NTP tid
delay(500); //vent 0,5 s, så wifi er klar
initTime("CET-1CEST,M3.5.0,M10.5.0/3"); //hent tid for københavn, https://github.com/nayarsystems/posix_t ... /zones.csv

//hent klub navn
String serverName = "https://kapsejlads.nu/hide-horn-esp.php";
if(WiFi.status()== WL_CONNECTED){
WiFiClient client;
HTTPClient http;

String serverPath = serverName + "?klubid=13";
Serial.println(serverPath);

// Your Domain name with URL path or IP address with path
http.begin(client, serverPath.c_str());

// If you need Node-RED/server authentication, insert user and password below
//http.setAuthorization("REPLACE_WITH_SERVER_USERNAME", "REPLACE_WITH_SERVER_PASSWORD");

// Send HTTP GET request
int httpResponseCode = http.GET();

if (httpResponseCode>0) {
Serial.print("HTTP Response code: ");
Serial.println(httpResponseCode);
String payload = http.getString();
Serial.println(payload);
}
else {
Serial.print("Error code: ");
Serial.println(httpResponseCode);
}
// Free resources
http.end();
}
else {
Serial.println("WiFi Disconnected");
}
}

void loop() {
Portal.handleClient();

//Hent lokal NTP fra ESP
struct tm timeinfo;
getLocalTime(&timeinfo);

//vis rulletekst
char message[]="Dette er min tekst";
//minX=-12*strlen(message);
minX=-12*25; //12 karakter i disp med denne font, 25 karakter tekst at vise
display.setTextSize(2);
display.clearDisplay();
display.setCursor(x,10);
display.print(WiFi.localIP().toString()+" - "); //viser IP i display
display.print(&timeinfo, "%H:%M:%S"); //viser tiden bagefter i display
//display.print(message); //viser tekst i display
display.display(); //skriv til display
x=x-1;
if(x<minX)x=display.width();
//Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S"); //skriv tid til monitor

}


Serial Monitor output:
WiFi connected: 192.168.1.118
Setting up time
Got the time from NTP
Setting Timezone to CET-1CEST,M3.5.0,M10.5.0/3
https://kapsejlads.nu/hide-horn-esp.php?klubid=13
Error code: -5

[mbratch]

Apologies for the stackoverflow-ish reply, but if you want others to read through all that code, as a courtesy to them, you should at least properly indent it and use the "Code" option in the editor to give it a fixed font to make it a bit easier to read.