Page 1 of 1

Chinese character SSID garbled,Cannot connect network

Posted: Tue Aug 29, 2017 4:21 pm
by soonrobot

Code: Select all

#include "WiFi.h"

void setup() {
	Serial.begin(115200);

	// WiFi.mode(WIFI_AP_STA);
	WiFi.mode(WIFI_STA);

	Serial.println("\n\n\nTansys_>");
	Serial.println("WiFi.getAutoConnect() => "+String( WiFi.getAutoConnect() ));

	Serial.printf("SSID:%s\r\n", WiFi.SSID().c_str());  //
	Serial.printf("PSW:%s\r\n", WiFi.psk().c_str());    //

    WiFi.begin( WiFi.SSID().c_str(), WiFi.psk().c_str() );
    long tm = millis();
    while( WiFi.status() != WL_CONNECTED && millis()-tm < 1000*8 ) {
        delay(500);
        Serial.print(".");
    }

	if( WiFi.status() == WL_CONNECTED ){
		Serial.print("IP Address: ");
		Serial.println(WiFi.localIP());

	}else{

		WiFi.beginSmartConfig();

		Serial.println("Waiting for SmartConfig.");
		while (!WiFi.smartConfigDone()) {
			delay(500);
			Serial.print(".");
		}

		Serial.println("");
		Serial.println("SmartConfig received.");

		Serial.println("Waiting for WiFi");
		while (WiFi.status() != WL_CONNECTED) {
			delay(500);
			Serial.print(".");
		}

		Serial.println("WiFi Connected.");

		Serial.print("IP Address: ");
		Serial.println(WiFi.localIP());
	}

}

void loop() {

}
Description:

1.SSID returns empty,I have modified the“ WiFiSTA.cpp”。
2.Chinese character SSID garbled,Cannot connect network!
p1.png
p1.png (10.28 KiB) Viewed 3722 times
p2.png
p2.png (19.95 KiB) Viewed 3722 times
p3.png
p3.png (54.51 KiB) Viewed 3722 times