Configuration Esp32_devkitc_v4

[ale195]

Hi guys! I have a problem related to the configuration of the following card : https://www.amazon.it/gp/product/B08LL7 ... UTF8&psc=1
I tried in the downloaded card manager : https://raw.githubusercontent.com/espre ... index.json
To insert in the card manager
-ESP32 Wrover Module
-ESP32 Wrover Kit (all version)
-ESP32 Dev Module
-DOIT ESP32 DEV KIT V1
-ESP 32 FM DevKit

Also I checked, the COM Port is correct.
I try to load the sketch but I always get errors even though I have inserted the capacitor 10uF on the enable.

Test code :

Code: [Select all] [Expand/Collapse]

1. void setup() {
2.  
3.   pinMode(22, OUTPUT);
4. }
5.  
6. void loop() {
7.   digitalWrite(22, HIGH);   // turn the LED on (HIGH is the voltage level)
8.   delay(1000);                       // wait for a second
9.   digitalWrite(22, LOW);    // turn the LED off by making the voltage LOW
10.   delay(1000);                       // wait for a second
11. }

GeSHi © Codebox Plus Extension

The error is the following: esptool.py v3.1
Serial port COM5
Connecting........_____....._____....._____....._____....._____....._____....._____

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header

ankThs in advance !