Not the way the ArduinoIDE works. For Dev_Board, the upload is over USB serial, so you must "set the port" under Tools.
Code: Select all
Sketch uses 234897 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15732 bytes (4%) of dynamic memory, leaving 311948 bytes for local variables. Maximum is 327680 bytes.
python /home/ray/.arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 /home/ray/.arduino15/packages/esp32/hardware/esp32/1.0.4/tools/partitions/boot_app0.bin 0x1000 /home/ray/.arduino15/packages/esp32/hardware/esp32/1.0.4/tools/sdk/bin/bootloader_qio_80m.bin 0x10000 /tmp/arduino_build_662290/ESP32_HSPI_VSPI_ILI9341_OK.ino.bin 0x8000 /tmp/arduino_build_662290/ESP32_HSPI_VSPI_ILI9341_OK.ino.partitions.bin
esptool.py v2.6
Serial port /dev/ttyUSB0
Connecting.....
Chip is ESP32D0WDQ6 (revision 0)
Features: WiFi, BT, Dual Core, Coding Scheme None
MAC: xx:xx:xx:xx:xx:xx
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
Compressed 8192 bytes to 47...
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 36287.5 kbit/s)...
Hash of data verified.
Compressed 17392 bytes to 11186...
Wrote 17392 bytes (11186 compressed) at 0x00001000 in 0.2 seconds (effective 826.6 kbit/s)...
Hash of data verified.
Compressed 235008 bytes to 121456...
Wrote 235008 bytes (121456 compressed) at 0x00010000 in 2.2 seconds (effective 864.0 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 128...
Wrote 3072 bytes (128 compressed) at 0x00008000 in 0.0 seconds (effective 7571.0 kbit/s)...
Hash of data verified.