ESP32 Forum

Hi all,

I have this error message, how to solve this problem?
In the project, I am using Bluetooth, and WIFI libraries.

text section exceeds available space in board
Sketch uses 1512630 bytes (115%) of program storage space. Maximum is 1310720 bytes.
Global variables use 59332 bytes (18%) of dynamic memory, leaving 268348 bytes for local variables. Maximum is 327680 bytes.
Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it.
Error compiling for board ESP32 Dev Module.

Couple options...

Change the partition table sizes

If you do not need OTA firmware update abilities, switch to a single partition

Remove the SPIFFS partition

Switch to the 16MB (128Mbit) version of the ESP32-WROOM32

Thank you.

I tried to change the partition table, but I don't know what is the best partition for the project. I am using Bluetooth and THINGER IoT platform, and several sensors.

I tried to change the partition and now I have a rebooting problem. What should I do?

Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
assertion "offset == dataSize" failed: file "/home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/nvs_flash/src/nvs_storage.cpp", line 438, function: esp_err_t nvs::Storage::readMultiPageBlob(uint8_t, const char*, void*, size_t)
abort() was called at PC 0x401203e3 on core 0

Backtrace: 0x4008cca8:0x3ffb5620 0x4008ced9:0x3ffb5640 0x401203e3:0x3ffb5660 0x4010111d:0x3ffb5690 0x40101188:0x3ffb5710 0x4010024e:0x3ffb5770 0x40100785:0x3ffb57b0 0x40110257:0x3ffb57d0 0x4011042f:0x3ffb5820 0x4010e472:0x3ffb5840 0x4010b0de:0x3ffb5860 0x4008fdf7:0x3ffb5880 0x400893bd:0x3ffb58c0