How to suppress sd_diskio message from USB serial output

[PeteDD]

I am using SD card module with ESP32-S3_DEVKIT1. My goal is to check for inserted card. Code is easy enough but when I do the SD.begin(my_SD_CS_pin), when the card is not present, I get a bunch of SDcommand messages from SD_diskio.cpp out the USB serial monitor port. How can I suppress these message (the ones beginning with the bracketed numbers)?

THANKS!

Here is what the serial traffic looks like:

Code: [Select all] [Expand/Collapse]

1. waiting for SD card
2. [  3813][W][sd_diskio.cpp:174] sdCommand(): no token received
3. [  3915][W][sd_diskio.cpp:174] sdCommand(): no token received
4. [  4015][W][sd_diskio.cpp:174] sdCommand(): no token received
5. [  4114][E][sd_diskio.cpp:199] sdCommand(): Card Failed! cmd: 0x00
6. [  4114][W][sd_diskio.cpp:516] ff_sd_initialize(): GO_IDLE_STATE failed
7. [  4115][E][sd_diskio.cpp:802] sdcard_mount(): f_mount failed: (3) The physical drive cannot work
8. [  4124][W][sd_diskio.cpp:174] sdCommand(): no token received
9. waiting for SD card
10.  
11.  
12. Found SD Card
13.  
14. SD Card Type: SDHC
15. SD Card Size: 30543MB
16.  
17.  
18. config.ini found.

GeSHi © Codebox Plus Extension

Here is what my code looks like:

Code: [Select all] [Expand/Collapse]

1. bool CheckForSDCard()
2. {
3.   if(!SD.begin(CS_PIN))
4.   {
5.     bSDCardPresent = false;
6.     return 0;
7.   }
8.   else
9.   {
10.     bSDCardPresent = true;
11.     return 1;
12.   }
13. }
14.  
15. void setup()
16. {
17.   Serial.begin(115200);
18.  
19.   Serial.println("Hello World!");
20.  
21.   while(!CheckForSDCard())
22.   {
23.     Serial.println("waiting for SD card");
24.   }
25.  
26.   Serial.println("\n\nFound SD Card\n");
27.  
28. // ETC, ETC, ETC
29.  

GeSHi © Codebox Plus Extension