Oh, it was so informative! Thank you for redirecting to another non-informative page. I searching for days on how phisically to connect my camera, and see only answers like thisESP_Sprite wrote: ↑Wed Jun 01, 2022 8:15 amYou probably want https://github.com/espressif/esp32-camera .
You are responding to a topic where someone asks for a software example, and you're angry the answer is a software example rather than how to physically connect the camera? I'm confused. If you need help connecting your camera, why not start a topic asking for exactly that?antonpegov wrote: ↑Thu Feb 01, 2024 7:46 am
Oh, it was so informative! Thank you for redirecting to another non-informative page. I searching for days on how phisically to connect my camera, and see only answers like this
Despite that topic starter asked for software example and got his answer - the connection defined in Initialisation section https://github.com/espressif/esp32-came ... ializationantonpegov wrote: ↑Thu Feb 01, 2024 7:46 amOh, it was so informative! Thank you for redirecting to another non-informative page. I searching for days on how phisically to connect my camera, and see only answers like thisESP_Sprite wrote: ↑Wed Jun 01, 2022 8:15 amYou probably want https://github.com/espressif/esp32-camera .
Code: Select all
#include "esp_camera.h"
//WROVER-KIT PIN Map
#define CAM_PIN_PWDN -1 //power down is not used
#define CAM_PIN_RESET -1 //software reset will be performed
#define CAM_PIN_XCLK 21
#define CAM_PIN_SIOD 26
#define CAM_PIN_SIOC 27
#define CAM_PIN_D7 35
#define CAM_PIN_D6 34
#define CAM_PIN_D5 39
#define CAM_PIN_D4 36
#define CAM_PIN_D3 19
#define CAM_PIN_D2 18
#define CAM_PIN_D1 5
#define CAM_PIN_D0 4
#define CAM_PIN_VSYNC 25
#define CAM_PIN_HREF 23
#define CAM_PIN_PCLK 22
static camera_config_t camera_config = {
.pin_pwdn = CAM_PIN_PWDN,
.pin_reset = CAM_PIN_RESET,
.pin_xclk = CAM_PIN_XCLK,
.pin_sccb_sda = CAM_PIN_SIOD,
.pin_sccb_scl = CAM_PIN_SIOC,
.pin_d7 = CAM_PIN_D7,
.pin_d6 = CAM_PIN_D6,
.pin_d5 = CAM_PIN_D5,
.pin_d4 = CAM_PIN_D4,
.pin_d3 = CAM_PIN_D3,
.pin_d2 = CAM_PIN_D2,
.pin_d1 = CAM_PIN_D1,
.pin_d0 = CAM_PIN_D0,
.pin_vsync = CAM_PIN_VSYNC,
.pin_href = CAM_PIN_HREF,
.pin_pclk = CAM_PIN_PCLK,