Issues flashing esp32-S3 on Adafruit Qualia board
Posted: Wed May 15, 2024 3:34 pm
When I try to flash a project (idf.py flash monitor --port COM3) on the esp32-s3 chip mounted on an Adafruit Qualia board (using the ESP-IDF environment), the build happens successfully, but then the program doesn't execute, or at least the monitoring of it doesn't seem to happen. Here's the output I get after the entire code is written to the chip:
It stays stuck at
Code: Select all
Wrote 1220720 bytes (763349 compressed) at 0x00010000 in 9.6 seconds (effective 1020.5 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 120...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (120 compressed) at 0x00008000 in 0.1 seconds (effective 463.9 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Executing action: monitor
Running idf_monitor in directory C:\Users\karun\ePuzzle\ezzle\ESP32S3_code
Executing "c:\Users\karun\ESP\.espressif\python_env\idf5.2_py3.11_env\Scripts\python.exe C:\Users\karun\esp\esp-idf\tools/idf_monitor.py -p COM4 -b 115200 --toolchain-prefix xtensa-esp32s3-elf- --target esp32s3 --revision 0 C:\Users\karun\ePuzzle\ezzle\ESP32S3_code\build\epuzz.elf --force-color -m 'c:\Users\karun\ESP\.espressif\python_env\idf5.2_py3.11_env\Scripts\python.exe' 'C:\Users\karun\esp\esp-idf\tools\idf.py'"...
--- WARNING: GDB cannot open serial ports accessed as COMx
--- Using \\.\COM4 instead...
--- esp-idf-monitor 1.2.1 on \\.\COM4 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x0 (DOWNLOAD(USB/UART0))
Saved PC:0x40041a76
0x40041a76: ets_delay_us in ROM
waiting for downloaduntil I manually kill the command. Any idea what might be going on and how to resolve this situation?waiting for download