nimble_host: No runtime?
Posted: Thu Apr 04, 2024 2:34 pm
My application primarily communicates via BLE w/ an L2CAP COC. After letting it work for a while, I view a task dump:
How is it possible that `nimble_host` has **zero** runtime? Is this not being used at all for BLE?
Code: Select all
ECUconnect> tasks
+----------------------+-----+-----+-----------+-------+-------+
| Task | AFN | PRI | Run Time | Load | Stack |
+----------------------+-----+-----+-----------+-------+-------+
| Tmr Svc | 0 B | 1 | 0 | 0% | 3372 |
| w5500_tsk | . B | 15 | 0 | 0% | 7424 |
| httpd | . B | 5 | 0 | 0% | 2068 |
| Console | . R | 1 | 1043 | 0% | 460 |
| CANyoneroTCP | . B | 1 | 65 | 0% | 1900 |
| esp_timer | 0 S | 22 | 60 | 0% | 3040 |
| ESP-MCP251XFD.I | 1 B | 23 | 0 | 0% | 2156 |
| sys_evt | 0 r | 20 | 1352 | 0% | 404 |
| tiT | . B | 18 | 0 | 0% | 1112 |
| main | 0 B | 1 | 0 | 0% | 676 |
| wifi | 0 B | 23 | 339 | 0% | 840 |
| btController | 0 B | 23 | 178 | 0% | 1988 |
| ipc0 | 0 S | 1 | 0 | 0% | 184 |
| ipc1 | 1 S | 24 | 0 | 0% | 480 |
| nimble_host | 0 B | 21 | 0 | 0% | 292 |
| MCP-Receiver | 1 B | 23 | 136 | 0% | 1240 |
| IDLE1 | 1 r | 0 | 98672 | 49% | 692 |
| IDLE0 | 0 r | 0 | 98649 | 49% | 700 |
+----------------------+-----+-----+-----------+-------+-------+