Dear Forum,
newbie question:
it is possible for an ESP32 program to receive serial text/data via the usb cable/connector used to flash it? I thought this might be possible as when using the Arduino IDE this is possible with serial.read etc. using the serial monitor.
I have only managed to find information on serial communication in the esp-idf using the 3 UART channels (e.g. with USB-serial cables), rather than the USB cable.
Apologies if this has been asked before and many thanks for any help.
can esp32 program receive serial text via usb flashing cable?
-
ESP_Sprite
- Posts: 9769
- Joined: Thu Nov 26, 2015 4:08 am
Re: can esp32 program receive serial text via usb flashing cable?
Yes, the 'usb flashing cable' you have normally ends up in an usb-to-serial converter on your devboard (separate chip from the ESP32), which is connected to UART0 of the ESP32. All in all, you can just access it like any other serial port.
Re: can esp32 program receive serial text via usb flashing cable?
many thanks ESP_Sprite!
I got it working on linux with the example code at:
https://github.com/espressif/esp-idf/bl ... ple_main.c
changing UART_1 to UART_0, as well as the pin numbers.
(took me ages to realize I had to turn off hardware control on minicom though!).
I got it working on linux with the example code at:
https://github.com/espressif/esp-idf/bl ... ple_main.c
changing UART_1 to UART_0, as well as the pin numbers.
(took me ages to realize I had to turn off hardware control on minicom though!).