I started with the i2s_adc_dac example then added the wifi station example. However, when I hit esp_wifi_start() my ADC reading goes to 0.
Documentation clearly states ADC2 can not be used with Wifi but I'm using ADC1.
Any idea's on what is going on?
Can Not Use I2S ADC with Wifi
Re: Can Not Use I2S ADC with Wifi
I get data for the first couple executions of i2s_read then it outputs a single value, see below. The value it settles on is different each time I reset the esp32. Again, this only happens when running wifi at the same time.
I tried changing wifi settings in menuconfig like optimizations, cores, flash, but saw no change.
Is there something I can try in menuconfig or is this a more fundamental problem?
I tried changing wifi settings in menuconfig like optimizations, cores, flash, but saw no change.
Is there something I can try in menuconfig or is this a more fundamental problem?
Code: Select all
======
0f 37 0f 37 f9 36 f9 36
ff 36 ff 36 ff 36 ff 36
13 37 13 37 d9 36 d9 36
f7 36 f7 36 d9 36 d9 36
3e 37 3e 37 d5 36 d5 36
1a 37 1a 37 3f 37 3f 37
e3 36 e3 36 e7 36 e7 36
c7 36 c7 36 ff 36 ff 36
======
I (2405) wifi:state: init -> auth (b0)
I (2415) wifi:state: auth -> assoc (0)
I (2425) wifi:state: assoc -> run (10)
I (2445) wifi:connected with Echo_42, aid = 2, channel 6, BW20, bssid = 80:2a:a8:41:64:cd
I (2445) wifi:security type: 4, phy: bgn, rssi: -45
I (2445) wifi:pm start, type: 1
I (2505) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (3105) esp_netif_handlers: sta ip: 192.168.1.66, mask: 255.255.255.0, gw: 192.168.1.1
I (3105) wifi station: got ip:192.168.1.66
I (3105) wifi station: connected to ap SSID:Echo_42 password:qscwdvpk
EC Reading: 4345 Value: 979
Free memory: 157392 bytes
======
1d 38 1d 38 c5 38 c5 38
7f 38 7f 38 f0 38 f0 38
e0 38 e0 38 7f 38 7f 38
53 38 53 38 a7 37 a7 37
60 37 60 37 a7 36 a7 36
00 36 00 36 8e 35 8e 35
ff 34 ff 34 ff 34 ff 34
c7 34 c7 34 d8 34 d8 34
======
EC Reading: 5105 Value: 587
Free memory: 157388 bytes
======
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
======
EC Reading: 5561 Value: 352
Free memory: 157388 bytes
======
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
======
EC Reading: 5834 Value: 211
Free memory: 157392 bytes
======
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
======
EC Reading: 5999 Value: 126
Free memory: 157392 bytes
======
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
7e 37 7e 37 7e 37 7e 37
======
Re: Can Not Use I2S ADC with Wifi
Also tried wrapping i2s_read() in i2s_adc_enable and i2s_adc_disable but that did not work.
Here is the entire striped down example file I am using. You can see where I launch the wifi station at the bottom of app_main
Here is the entire striped down example file I am using. You can see where I launch the wifi station at the bottom of app_main
Code: Select all
#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_spi_flash.h"
#include "esp_err.h"
#include "esp_log.h"
#include "esp_partition.h"
#include "driver/i2s.h"
#include "driver/adc.h"
#include "audio_example_file.h"
#include "esp_adc_cal.h"
static const char* TAG = "ad/da";
#include "station/station_example_main.c"
#define V_REF 1100
#define ADC1_TEST_CHANNEL (ADC1_CHANNEL_7)
#define EXAMPLE_I2S_NUM (0)
#define EXAMPLE_I2S_SAMPLE_RATE (16000)
#define EXAMPLE_I2S_SAMPLE_BITS (16)
#define EXAMPLE_I2S_BUF_DEBUG (1)
#define EXAMPLE_I2S_READ_LEN (16 * 1024)
#define EXAMPLE_I2S_FORMAT (I2S_CHANNEL_FMT_RIGHT_LEFT)
#define EXAMPLE_I2S_CHANNEL_NUM ((EXAMPLE_I2S_FORMAT < I2S_CHANNEL_FMT_ONLY_RIGHT) ? (2) : (1))
#define I2S_ADC_UNIT ADC_UNIT_1
#define I2S_ADC_CHANNEL ADC1_CHANNEL_7
void example_i2s_init(void)
{
int i2s_num = EXAMPLE_I2S_NUM;
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_TX | I2S_MODE_DAC_BUILT_IN | I2S_MODE_ADC_BUILT_IN,
.sample_rate = EXAMPLE_I2S_SAMPLE_RATE,
.bits_per_sample = EXAMPLE_I2S_SAMPLE_BITS,
.communication_format = I2S_COMM_FORMAT_PCM,
.channel_format = EXAMPLE_I2S_FORMAT,
.intr_alloc_flags = 0,
.dma_buf_count = 2,
.dma_buf_len = 1024,
.use_apll = 1,
};
//install and start i2s driver
i2s_driver_install(i2s_num, &i2s_config, 0, NULL);
i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
i2s_set_adc_mode(I2S_ADC_UNIT, I2S_ADC_CHANNEL);
}
void example_disp_buf(uint8_t* buf, int length)
{
#if EXAMPLE_I2S_BUF_DEBUG
printf("======\n");
for (int i = 0; i < length; i++) {
printf("%02x ", buf[i]);
if ((i + 1) % 8 == 0) {
printf("\n");
}
}
printf("======\n");
#endif
}
int example_i2s_dac_data_scale(uint8_t* d_buff, uint8_t* s_buff, uint32_t len)
{
uint32_t j = 0;
#if (EXAMPLE_I2S_SAMPLE_BITS == 16)
for (int i = 0; i < len; i++) {
d_buff[j++] = 0;
d_buff[j++] = s_buff[i];
}
return (len * 2);
#else
for (int i = 0; i < len; i++) {
d_buff[j++] = 0;
d_buff[j++] = 0;
d_buff[j++] = 0;
d_buff[j++] = s_buff[i];
}
return (len * 4);
#endif
}
void example_i2s_adc_dac(void*arg)
{
int i2s_read_len = EXAMPLE_I2S_READ_LEN;
int flash_wr_size = 0;
size_t bytes_read, bytes_written;
uint8_t* flash_read_buff = (uint8_t*) calloc(i2s_read_len, sizeof(char));
uint8_t* i2s_write_buff = (uint8_t*) calloc(i2s_read_len, sizeof(char));
while (1) {
printf("Playing file example: \n");
int offset = 0;
int tot_size = sizeof(audio_table);
while (offset < tot_size) {
int play_len = ((tot_size - offset) > (4 * 1024)) ? (4 * 1024) : (tot_size - offset);
int i2s_wr_len = example_i2s_dac_data_scale(i2s_write_buff, (uint8_t*)(audio_table + offset), play_len);
i2s_write(EXAMPLE_I2S_NUM, i2s_write_buff, i2s_wr_len, &bytes_written, portMAX_DELAY);
offset += play_len;
}
}
}
void adc_read_task(void* arg)
{
size_t bytes_read;
int i2s_read_len = EXAMPLE_I2S_READ_LEN;
char* i2s_read_buff = (char*) calloc(i2s_read_len, sizeof(char));
while(1) {
// i2s_adc_enable(EXAMPLE_I2S_NUM);
i2s_read(EXAMPLE_I2S_NUM, (void*) i2s_read_buff, i2s_read_len, &bytes_read, portMAX_DELAY);
example_disp_buf((uint8_t*) i2s_read_buff, 64);
// i2s_adc_disable(EXAMPLE_I2S_NUM);
}
}
esp_err_t app_main(void)
{
example_i2s_init();
esp_log_level_set("I2S", ESP_LOG_INFO);
xTaskCreate(example_i2s_adc_dac, "example_i2s_adc_dac", 1024 * 2, NULL, 5, NULL);
xTaskCreate(adc_read_task, "ADC read task", 2048, NULL, 5, NULL);
station_main();
return ESP_OK;
}
Who is online
Users browsing this forum: No registered users and 362 guests