there is a way to do it? (I don't need to validate certificate)
thanks
Code: Select all
#include <WiFi.h> //Wifi library
#define EAP_IDENTITY "blabla" //if connecting from another corporation, use identity@organization.domain in Eduroam
#define EAP_USERNAME "blabla" //oftentimes just a repeat of the identity
#define EAP_PASSWORD "mypass" //your Eduroam password
const char *ssid = "myssid"; // Eduroam SSID
const char *host = "google.it"; //external server domain for HTTP connection after authentication
int counter = 0;
// NOTE: For some systems, various certification keys are required to connect to the wifi system.
// Usually you are provided these by the IT department of your organization when certs are required
// and you can't connect with just an identity and password.
// Most eduroam setups we have seen do not require this level of authentication, but you should contact
// your IT department to verify.
// You should uncomment these and populate with the contents of the files if this is required for your scenario (See Example 2 and Example 3 below).
//const char *ca_pem = "insert your CA cert from your .pem file here";
//const char *client_cert = "insert your client cert from your .crt file here";
//const char *client_key = "insert your client key from your .key file here";
void setup() {
Serial.begin(115200);
delay(10);
Serial.println();
Serial.print("Connecting to network: ");
Serial.println(ssid);
WiFi.disconnect(true); //disconnect form wifi to set new wifi connection
WiFi.mode(WIFI_STA); //init wifi mode
// Example1 (most common): a cert-file-free eduroam with PEAP (or TTLS)
WiFi.begin(ssid, WPA2_AUTH_PEAP, EAP_IDENTITY, EAP_USERNAME, EAP_PASSWORD);
// Example 2: a cert-file WPA2 Enterprise with PEAP
//WiFi.begin(ssid, WPA2_AUTH_PEAP, EAP_IDENTITY, EAP_USERNAME, EAP_PASSWORD, ca_pem, client_cert, client_key);
// Example 3: TLS with cert-files and no password
//WiFi.begin(ssid, WPA2_AUTH_TLS, EAP_IDENTITY, NULL, NULL, ca_pem, client_cert, client_key);
while (WiFi.status() != WL_CONNECTED) {
wl_status_t status = WiFi.status();
Serial.print(status);
delay(500);
Serial.print(".");
counter++;
if (counter >= 60) { //after 30 seconds timeout - reset board
ESP.restart();
}
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address set: ");
Serial.println(WiFi.localIP()); //print LAN IP
}
void loop() {
if (WiFi.status() == WL_CONNECTED) { //if we are connected to Eduroam network
counter = 0; //reset counter
Serial.println("Wifi is still connected with IP: ");
Serial.println(WiFi.localIP()); //inform user about his IP address
} else if (WiFi.status() != WL_CONNECTED) { //if we lost connection, retry
WiFi.begin(ssid);
}
while (WiFi.status() != WL_CONNECTED) { //during lost connection, print dots
delay(2500);
Serial.print(".");
counter++;
if (counter >= 60) { //30 seconds timeout - reset board
ESP.restart();
}
}
Serial.print("Connecting to website: ");
Serial.println(host);
NetworkClient client;
if (client.connect(host, 80)) {
String url = "/rele/rele1.txt";
client.print(String("GET ") + url + " HTTP/1.1\r\n" + "Host: " + host + "\r\n" + "User-Agent: ESP32\r\n" + "Connection: close\r\n\r\n");
while (client.connected()) {
String line = client.readStringUntil('\n');
if (line == "\r") {
break;
}
}
String line = client.readStringUntil('\n');
Serial.println(line);
} else {
Serial.println("Connection unsuccessful");
}
}