RST/EN not connected to pin header on one ESP32-CAM board.
Posted: Wed Nov 22, 2023 11:43 am
I have two ESP32-CAM boards, on one of them pin 1 on P1 is connected to EN on the other pin 1 on P1 is connected to GND.
The ESP32-CAM-MB can't reset the second one. PCB is marked HW-297.
Is this common? How to avoid when buing more boards?
The ESP32-CAM-MB can't reset the second one. PCB is marked HW-297.
Is this common? How to avoid when buing more boards?