ESP32-C3 does not support erase-flash command?

[dgduncan]

Hello,
When attempting to erase the flash of one of my boards today, I got the error

A fatal error occurred: ESP32-C3 ROM does not support function erase_flash.
esptool.py failed with exit code 2

This has started happening as of my upgrade from release/4.3 to release/4.4 of the ESP-IDF. Is this correct? And if so, is there an alternative to cleaning my flash for development?

[ESP_Sprite]

How specifically did you try to erase the flash; can you post e.g. the esptool command line here?

[dgduncan]

I did

Code: Select all

 idf.py -p COM12 erase-flash

I ran install.bat when I changed version and also ran export.bat to get all ENV variables.

[dgduncan]

Is there a

Code: Select all

menuconfig

item that may be doing this? I switched over to another project that was totally default and I had no issues erasing the flash

[dgduncan]

I have figured out the problem. When switching the "Channel for console output" setting in menuconfig, it sets CONFIG_ESPTOOLPY_NO_STUB to Y. When this setting is changed to Y, erase-flash does not work. If you set the "Channel for console output" back to default, that setting does not get reset back to N.