Esp32 Devkit v1 PCB Eagle library

[leonidesfelix]

Just to share this, i hope help somebody


Esp32 Devkit v1 PCB Eagle library

Its for the 30 pins version

[trustmiao]

nice one

[NosferatusPB300]

Hi, tanks for the lib... I used to use this on my projects, but I want just warnig everyone that there are two erros (pin IO27 and pin GND1). Those pins was wrong conected.

[ljavih]

Hi I use one of the libraries I found in the internet for the ESP32 development board, the one with 38 pins. The pin out and everything is correct. The problem is that when I printed the circuit the size of the board is bigger than the real size of the board, hence the ESP32 board didn't fit in the PCB. Actually the size of the board in the PCB fits perfect with an ESP8266 board. Does anyone knows how I could solve this and where I could found eagle libraries I could trust?

[Jimyxt]

Hello,
I have corrected the pins assigment in the first submitted file, I also correct the pin separation as the pins are 1000 mils appart (1 inch). I hope it is OK and be useful for everyone. I took the measurements from a board I bough from DOIT.

[westech]

Thank you, I'm learning PCB in the Fusion 360 workspace. This should make life easier.

[zorglups]

Thank you very much !!!

[Michalpu]

Are there also Altium libs?