ESP32-S3 input only pin?

[adamalfath]

The S3 docs mentioned that GPIO34-39 is input only pins. I know it's applicable to ESP32, but is it also true for S3? I just realize that I already have a custom board that used that pin as SPI port (GPIO35-38 = MISO, SCK, MOSI, CS) and it works just fine. I just need confirmation.
Thank you.

[ESP_Sprite]

The S3 doesn't have input-only pins, so I think someone forgot to remove those texts. I'll file a ticket to get this fixed. Thanks for bringing this to our attention!

[adamalfath]

Alright, thanks for the confirmation.

[FiwiDev]

The S3 doesn't have input-only pins, so I think someone forgot to remove those texts. I'll file a ticket to get this fixed. Thanks for bringing this to our attention!

Thanks for the clarification...but the docs still say "input only" in 2 places on this page (one shown here):

Untitled.png (113.48 KiB) Viewed 2291 times

https://docs.espressif.com/projects/esp ... /gpio.html

[ESP_Sprite]

Hm, must have been overlooked. Lemme see where that ticket went; thanks for noticing.

[ESP_Sprite]

Okay, it seems we can't trivially fix this as these docs are generated from the header files. We decided on the 'ESP32:' bit to indicate this only goes for the original ESP32 chips.