Hi, the blog post of the project is at: https://www.twilio.com/blog/2018/07/wat ... -sync.html, and the repository is at: https://github.com/huaxiaozhong1/Watchi ... nc-for-IoT. Cheers!

Hi, I am selecting "esp32 dev module". It brought some issues to our development, but haven't blocked ours So, you could put the case into a lower priority for the time being

Hi, with running codes similar to https://github.com/TwilioDevEd/sync-for-iot-examples/blob/master/Espressif_ESP32/Quickstart/MQTT_ESP32_Sync.ino, our test can go on :-) The issue of "Guru Meditation Error: Core 0 panic'ed" does still exist but not very frequently. Especially after the board boots u...

Hi, thank you so much for your rapid and targeted guidance! May I report some updates as below? 1, To fix the issue of power unstability, I went to market and bought a 5V power cable this afternoon. Then connected the cable to our board (see webwxgetmsgimg-2.jpeg attached). 2, From the picture, you ...

Hello, have you REPRODUCED the issue? Please notice that the issue happened in a "standard" Arduino example calling "WiFiClient". If it is a real bug with ESP-Wrover_kit dev board, it will really impacts developers' confidence to implement WiFi-related app on the board Thanks!

My environment is as below. esp-wrover-kit, Arduino IDE with selecting board "ESP32 Dev Module" (see https://www.esp32.com/viewtopic.php?f=19&t=5002). When I ran ~/arduino-1.8.5/hardware/espressif/esp32/libraries/WiFi/examples/WiFiClient/WiFiClient.ino, an error was reported saying "Guru Meditation ...

Greeting! Following "Installation instructions for Debian / Ubuntu OS" of https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/debian_ubuntu.md, folder "espressif/esp32" was added into both "~/Arduino/hardware" and "~/arduino-1.8.5/hardware". According to "Arduino IDE 1.5 3rd part...

Hi krzychb, Your guidance is really helpful! The esp-wrover-kit dev board has been proved to work under EspArduino environment. My first evidence was got through the following steps. 1, The new actions should be taken based at all procedures ahead that I listed yesterday. Those include cloning ardui...

Hi krzychb, I have just taken the following actions. 1, copied esptool.py from esp/esp-idf/components/esptool_py/esptool to ~/Arduino/hardware/espressif/esp32/tools, and changed DEFAULT_PORT to /dev/ttyUSB1. 2, cd makeEspArduino 3, make -f makeEspArduino.mk ESP_ROOT=~/Arduino/hardware/espressif/esp3...

Thanks for your rapid feedback. To keep the serial port as same, I changed the DEFAULT_PORT of USB port name from /dev/ttyUSB0 to /dev/ttyUSB1 in esptool.py. Let me try esptool.py v2.2.1 to arduino-esp32, to see what will happen