D+ and D- can be used as USB, but if you want to read UART, you need a USB to UART module converter or you can use software to do the conversion to UART. Don't know if there are any other ways around that

Hi @ a2800276, apologies for the ambiguity. This is the board i am using https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/Seeeduino-XIAO-ESP32C3-SCH.pdf As you can see, it is a gpio 19 & 18 direct to the usb port. This is a sample code of what i was doing in esp-idf, and it works when i was us...

Essentially I would like to know if it's possible to do it as I intend to. So according to the gpio mux, am I able to use the gpio 18 & 19 for serial communication? Because currently i am only using it for flashing firmware but based on the documentation I have posted above, it seems like I can also...

Hi @a2800276, I will be more specific. Basically I have been working with uart to send messages back and forth from a laptop environment using esp32c3 mini1 dev kit. I have been using Uart Channel 1 with gpio pins 1 & 0 as the dev kit has an onboard USB to uart converter. But due to some constraints...

i would like to know if it is possible to use the esp32c3 as a serial port to communicate with other devices? I am currently using the uart channel to do so but i would like to know if it is possible to do a one to one replace to use the D+ and D- pins instead of the Tx and Rx. How would i do so? ht...

I am trying to figure out how to setup a heartbeat publication from all my server nodes to my client nodes. do i need to specifically setup a health srv/client model? Can i only do it through a provisioner? I have scanned through the examples provided and none of them seems to show any heartbeat mes...

@usmanmehmood55 hi may i ask if your LPN experiences message drop? It seems that LPN in the latest master branch is unable to process the message in queue after polling. It does not trigger message callback in the node after polling the friend node. In total i am using 3 nodes. One client node, one ...