I have an hx711 connect to 3.3v PIN of the board, but drains too much Power, Is there a very simple way of cutting the Power from 3.3v PIN going to the hx711 powering the load cell? A switch that can be turned on and off using a command free PIN of the board. Thanks

I changed the library, I used this https://github.com/olkal/HX711_ADC If used with esp32 you have to enable the delay. I get good and stable data. Now I' trying to understand sleep mode, if I get It wright the esp32 can be shut down completely if you want minimum power drain, but i loose data, so wh...

Hi, using PIN 21,22 finally "worked", but esp frequency does not go well with hx711, so using the library from here and the example code did not end in the hoped way. (I keep reading 8388608 value) https://github.com/bogde/HX711 Lowering the frequency of the esp32 seems to create new issues and othe...

/** * * HX711 library for Arduino - example file * https://github.com/bogde/HX711 * * MIT License * (c) 2018 Bogdan Necula * **/ #include "HX711.h" // HX711 circuit wiring const int LOADCELL_DOUT_PIN = 21; const int LOADCELL_SCK_PIN = 22; HX711 scale; void setup() { Serial.begin(38400); Serial.prin...

I'm new to the forum, first of all thanks! I'm trying to connect a LilyGO/LilyGO-T-SIM7000G to a HX711 or ADS1232 https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G you can find the img of the pinout here https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/blob/master/Historical/SIM7000G_20200415/R...

I'm new in this forum so first of all THANKS I'm trying to connect an HX711 to the LilyGO/LilyGO-T-SIM7000G https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G the first attempt is running a I2C scanner code, I' don't have problems identifyng a one wire temperature sensor or a BME280, but cannot fin...