我使用的是ESP32-S3-Korvo-2开发板，当我进行voip进行通话的时候显示 `Initial ONE-MIC auido front-end `，这应该说明voip只是使用了一个microphone?如果只使用一个microphone的话，使用的是哪一个？

Hi
I hope save some data to nvs. I use esp-idf function to do this. but esp-adf auto reset, display can not write flash. how to do I can save data to nvs?

Thanks

same status. if how to processed? ``` I (43870) SIP: [1970-01-01/00:00:21]<<====================== I (43880) SIP: Remote RTP addr=192.168.0.100 W (43880) SIP: CHANGE STATE FROM 68, TO 72, :func: _sip_uac_process_res:1589 I (43890) SIP: Remote RTP port=13362 I (43890) APP_VOIP: SIP_EVENT_AUDIO_SESSIO...

I copy esp-adf/examples/advanced_examples/voip/tools/audio-esp.bin to tf card flash_tone.bin. but update fail. maybe what's problem? ``` ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT) SPIWP:0xee mode:DIO, clock div:1 load:0x3fcd0108,len:0x17c0 load:0x403...

Dear Friend I found ESP32-S3-Korvo-2 use the MSM381A3729H9BPC MEMS microphone. It's sensitivity -38dB. Now, I select another microphone(AP3722AT) instead of it. but, AP3722AT's sensitivity is -42dB. I test AP3722AT's microphone level is lower. if I must use -38dB microphone or How to change the code...

Dear

I test use esp_layraT test voip function. aec working fine. now, I use ESP32-S3-Korvo-2 test voip function. found aec function not working or working not good. I think maybe I need to adjust aec delay. I don't how to change aec delay ?

Can you help me? or maybe other problem?

Dear support

我希望将wwe和voip融合到一起。通过wwe唤醒并且语音呼叫voip进行拨打电话。我看到wwe和voip采用了不同的音频处理代码。我不知道是否可以将两个代码融合到一起。采用统一个套代码。这样子可以实现wwe唤醒并且呼叫voip的功能？

谢谢

5aec971 (HEAD -> dev/2.0, origin/dev/2.0) bugfix(doc): Remove incorrect board information

CC build/lwip/port/esp32/netif/wlanif.o CC build/lwip/port/esp32/debug/lwip_debug.o AR build/lwip/liblwip.a CC build/main/main.o /root/esp-skainet/examples/cn_speech_commands_recognition/main/main.c:20:10: fatal error: esp_board_init.h: No such file or directory #include "esp_board_init.h" ^~~~~~~~~...

this function is fine. I make a error on other function. It affect MQTT function.