Hello, Touch interrupt is not detaching. int threshold = 20; bool touch1detected = false; void gotTouch1() { touch1detected = true; } void setup() { Serial.begin(115200); delay(1000); Serial.println("ESP32 Touch Interrupt Test"); touchAttachInterrupt(T0, gotTouch1, threshold); delay(1000); detachIn...

SOLVED!

I sequantionally diconnected DTR, RX, TX from board.
Surprising for me the board is continueing to work correctly.
After connecting GND to AC ground the board became
to work stabile.

Hi, The scetch is working correctly when UART is connected to computer. And does not work when UART is disconnected. What is a reason? Thanks. Power is independent. USB-TTL adapter has 4 wires (GND, RX, TX, DTR) byte ledPin1 = 4; byte ledPin2 = 16; byte ledPin3 = 23; byte interruptPin1 = 39; byte in...

Hi. The code: /* * Connect the SD card to the following pins: * * SD Card | ESP32 * D2 12 * D3 13 * CMD 15 * VSS GND * VDD 3.3V * CLK 14 * VSS GND * D0 2 (add 1K pull up after flashing) * D1 4 */ #include "FS.h" #include "SD_MMC.h" void listDir(fs::FS &fs, const char * dirname, uint8_t levels){ Seri...

Using ESP32 WROVER KIT and library SD_MMC I have increased buffer size from 512 to 5120 bytes. Results are: Lexar 1800x 32GB HCII 11:57:17.800 -> 10485760 bytes read for 8773 ms 11:57:22.137 -> 10485760 bytes written for 4333 ms SanDisk Ultra 32GB HCI 12:05:13.484 -> 10485760 bytes read for 6835 ms ...

I am trying to burn firmware to new wrover module. Starting it is showing AP: 30AEA4C56741 STA: 30AEA4C56740 BT: 30AEA4C56742 ETHERNET: 30AEA4C56743 But after downloading is stopping (no green line) and ERROR. test offset : 4096 0x1000 case ok test offset : 32768 0x8000 case ok test offset : 65536 0...

Hi, I am trying to receive highest reading speed with ESP-WROVER-KIT. I use micro sd Sundisk ultra, 32GB, cl.10, 533x, 80MB/s both reading and writing. Result: 11:40:06.425 -> 1048576 bytes read for 693 ms 11:40:08.431 -> 1048576 bytes written for 1989 ms It looks too slow. How to increase speed und...

Hi, I am trying to receive highest reading speed with ESP-WROVER-KIT. I use micro sd Sundisk ultra, 32GB, cl.10, 533x, 80MB/s both reading and writing. Result: 11:40:06.425 -> 1048576 bytes read for 693 ms 11:40:08.431 -> 1048576 bytes written for 1989 ms It looks too slow. How to increase speed und...

Hi, For my POV project is necessary big memory for leds data arrays. RAM is not enough. If to move from WROOM TO WROVER B, is it possible to use PSRAM for this purpose at Arduino IDE? If YES, how to connect PSRAM and how slower it will be work? Thanks! P.S. May I use pins for SDMMC and vspi? SDMMC E...

Thank you very much for the reply.

What about speed of SDMMC and vspi if I shall not use hspi?
SDMMC
D2 12
D3 13
CMD 15
CLK 14
D0 2
D1 4.

vspi
SCLK = 18, MISO = 19, MOSI = 23, SS = 5.

P.S. Where to find description of SDMMC library? I have found only examples.

Thanks!